Menu
Request an estimate

Area-first drywall tool

Convert removed wall area into a visible bare-panel baseline.

The tool uses named USG product weights rather than an invented universal drywall factor. It shows what clean new board alone might represent, then keeps demolition finish, moisture, fasteners, and mixed layers outside the number.

Text PhotosGet a Free EstimateBuild a detailed request
Installed board area

Use total wall or ceiling face area. Add layers explicitly; do not use room floor area.

BARE-PANEL EQUIVALENT0.63tons nominal
Board face area
1,000 ft²
4 × 8 equivalents
31.3

USG nominal product weight. This is not an actual demolition-load weight: finish, compound, fasteners, texture, moisture, tile, lath, framing, and product variation are excluded.

USE IT WELL

Measure every board face and layer.

A 10-foot wall that is 8 feet high contains 80 square feet on one face. A two-layer rated assembly contains twice the board face area before accounting for the opposite side.

ADD OUTSIDE THE TOOL

  • Joint compound, texture, and paint
  • Wet or water-damaged board
  • Tile, plaster, lath, insulation, and framing
  • Product-specific density and breakage

MANUFACTURER SOURCES

Named products, visible assumptions.

  1. 01
    USG UltraLight 1/2-inch

    USG lists a nominal 1.25 lb/ft² for the named panel.

    Source ↗
  2. 02
    USG Firecode X 5/8-inch

    USG lists a nominal 2.2 lb/ft² for the named panel.

    Source ↗
APPLY THE BASELINE

Get an estimate for drywall debris removal

Send the face area, layers, product/thickness if known, condition, added finishes, access, and photos.

Start the estimate ↗

START WITH THE SCOPE

Material. Access.
Quantity. Timing.

Those four facts make the first conversation useful—and make unsupported price promises unnecessary.

START
Text PhotosGet a Free Estimate